Technical Articles
CAN Bus Diagnostics
- CAN Error Detection and Fault Confinement
Five error types, error flags, REC/TEC counters and bus-off.
- Diagnose CAN Communication with SocketCAN
Check interface state and traffic counters, then capture error messages to narrow down the fault.
- Troubleshoot CAN Bus Wiring
Check termination placement, stubs, twisted-pair cable and the signal ground reference.
- CAN Message ID Allocation and Conflict DiagnosisOutline
Understand same-ID contention, transmitter ownership, and ID allocation for requests, replies and broadcasts.
Robotics Communication
- AgiBot Lingxi X1 Communication Architecture and CAN FD Bus Load
Explore the EtherCAT-to-six-channel CAN FD topology and the effect of 64-byte broadcasts on bus load.
- Improve the CAN Physical Link on an OpenArm
Remove an open stub, correct duplicate termination and check the ground reference.
- Real-Time CAN FD Communication in Embodied RobotsOutline
Plan a multi-joint cycle around BRS, long-frame broadcast and bus scheduling.
- Integrating USB-CAN Reliably in RobotsOutline
Integration considerations for module, board-level, board-to-board and chip-level USB-CAN designs.
- CAN Connectors and Harnesses for Robot Joint MotorsOutline
Design trade-offs for combined power and CAN connectors, ground references and harness shielding.
CAN Interfaces and Performance
- Compare CAN Expansion Interfaces: USB, SPI, PCIe and EtherCATOutline
Compare four CAN expansion approaches against host interfaces, device topology and control-cycle needs.
- CAN and CAN FD Throughput Limits and USB-CAN FD ComparisonOutline
Compare theoretical frame rate and payload throughput with sustained USB-CAN FD performance under matching traffic.
Online Tool Guides
- CAN / CAN FD Bit Timing, MCU Code and TDC
Choose timing from the target bit rate and sample point, select an export format and check MCU templates and TDC units.
- Calculate CAN Frame Length and Bus Load with the Waveform Simulator
Inspect the waveform, CRC and stuff bits, then calculate bus occupancy from the transmission period.
- Tool Guide: SocketCAN Command GeneratorOutline
Outline for generating SocketCAN interface, transmit, capture, logging and bus-load commands.