Skip to content
Open in AI

CAN Connectors and Harnesses for Robot Joint Motors ​

Outline ​

  • Connectors and pinouts — Compare XT30 2+2 combined power and CAN connectors with dedicated CAN connectors. Check CAN_H, CAN_L, CAN_GND and the power return.
  • Ground reference and isolation — Conditions for referencing non-isolated nodes through the power return, CAN-side reference conductors for isolated nodes, and transceiver common-mode limits.
  • Twisting and routing — Route CAN_H and CAN_L as a pair, limit untwisting near terminals and keep stubs short. Assess parallel runs beside motor power wiring.
  • Shielding and grounding — Compare two-wire links with an existing reference path, dedicated CAN_GND and shielded harnesses. Cover single-ended, double-ended and high-frequency-coupled shield connections. Check pinouts and grounding points where the equipment uses the shield as a reference conductor.
  • Installation checks — Verify pinouts, reference continuity, terminator placement and harness retention.