Skip to content
Open in AI

Gen 3 100/1000BASE-T1 Media Converter (MACsec / TC10) ​

Gen 3 100/1000BASE-T1 Media Converter (MACsec / TC10) exterior

Connect 100 or 1000 Mbit/s automotive Ethernet to RJ45 for MACsec and TC10 sleep/wake integration.

Technical Specifications ​

ItemTarget specification
T1 sideOne single-pair automotive Ethernet port, 100BASE-T1 or 1000BASE-T1
RJ45 sideOne standard twisted-pair Ethernet port, 100BASE-TX or 1000BASE-T respectively
Media conversionBidirectional conversion at the link rate required by the connected devices
T1 link roleMatch the master/slave configuration of the ECU and test equipment
MACsecIEEE 802.1AE link security. Confirm where the secure link terminates, how keys are managed and what frames are visible on the RJ45 side
TC10OPEN Alliance TC10 sleep/wake on the T1 link. Confirm wake direction, external triggers and recovery timing for the network
Wiring and powerConfirm the T1 connector, harness and DC input requirements for the bench or installation

MACsec handles link security, and TC10 handles physical-layer power management. To evaluate both together, specify when the ECU needs the physical link and secure session restored after wake-up.

Typical Applications ​

  • ECU bench connectivity. Connect a T1 port to a computer or test instrument with a standard RJ45 interface.
  • MACsec integration. Identify the peer, key management method and frames the test equipment needs to observe.
  • TC10 power management integration. Plan tests for ECU sleep, wake triggers and link recovery.

For existing automotive Ethernet converter specifications, see KH-RAD.NEPTUNE-26.

Product Inquiry ​

Include the T1 rate, master/slave role, connector, MACsec peer and key-management needs, plus the TC10 wake source and link recovery time required.

Email sales@kunhong-elec.com