Skip to content
Open in AI

KH-UCANFD-B2B Series ​

Board-to-board USB CAN / CAN FD for embedded systems

Pair a core board with a baseboard

Add CAN / CAN FD to a custom baseboard with an X2 or X4 core board, or start evaluating with a companion kit. The three EVKs provide 4, 8 and 16 channels.

Design a baseboard
  • Choose a core board: X2 provides two channels and X4 provides four. Both have the same dimensions.
  • Design the baseboard: Use the baseboard to route the host connection and CAN channels and provide termination.
Evaluate with a kit
  • Kit configurations: The X4, X8 and X16 EVKs pair 1, 2 or 4 X4 core boards with the corresponding baseboard.
  • Multi-protocol firmware support: Use CANmeleon Device Manager to select firmware for each core board, then set up the corresponding driver and software. For example, install GS USB firmware to use the Linux kernel’s built-in gs_usb driver with SocketCAN. The driver must support the required channel count.

The core board provides the USB CAN / CAN FD interface. The baseboard routes the host and field-bus connections. Design a baseboard around the enclosure and wiring, or use an EVK to evaluate channel configurations, firmware and host software. The family serves robotics, industrial control and other embedded systems that connect to multiple CAN buses.

ModelConfigurationCAN FD channels
KH-UCANFD-B2B-X2Core board2 (CAN1 and CAN2)
KH-UCANFD-B2B-X4Core board4 (CAN1 through CAN4)
KH-UCANFD-B2B-X4-EVK1 × X4 core board + KH-UCANFD-B2B-X4-EVB baseboard4
KH-UCANFD-B2B-X8-EVK2 × X4 core board + KH-UCANFD-B2B-X8-EVB baseboard8
KH-UCANFD-B2B-X16-EVK4 × X4 core board + KH-UCANFD-B2B-X16-EVB baseboard16

Factory-installed KCAN-USB Firmware ​

Windows ​

ItemDetails
DriverBuilt-in WinUSB. No separate driver installation required.
CAN send and receive applicationkcan-bus (Windows x64)
Development libraryKCANBasic API (Windows x64)

Linux ​

ItemDetails
SocketCAN driverkcan driver from the Linux SDK
CAN communication toolscan-utils
Programming APISocketCAN

CANmeleon Firmware Ecosystem ​

Install CANmeleon firmware on the B2B core boards to use them with more software. In the X4, X8 and X16 EVKs, install firmware on each X4 core board and use the X4 column below for its channel limits.

FirmwareX2 max.X4 max.WindowsLinux
KCAN X424kcan-bus, KCANBasic API (x64)SocketCAN, can-utils (kcan driver)
GS USB (CAN FD supported)24EcuBus-ProSocketCAN, can-utils (gs_usb)
PCAN Pro FD22PCAN-View, PCAN-BasicSocketCAN (peak_usb)
Kvaser FD24CanKing 7, CANlibCanKing 7 and CANlib (Kvaser SDK), or SocketCAN (kvaser_usb)
ZLG USBCANFD24ZCANPRO, ZCAN APISee ZLG driver documentation for the selected model

Check the firmware modes and channel counts available for your device license in CANmeleon device manager.